Office chair glides replace or disable rolling wheels to help keep a chair in place. The uvce Store glides are best for a low-profile fit, while AXL’s high-profile set is better for preserving chair height. Caster stoppers offer another approach, and the Duoduo45 and RCHYFEED sets highlight floor-contact features. Before choosing, compare stem dimensions and installed height with your chair.
| Product | Best For | Key Detail |
|---|---|---|
| uvce Store Bell Glides | Low-profile conversion | 37 mm installed height; 11 mm stem |
| AXL Chair Glides | Maintaining seat height | 61 mm installed height |
| Caster Stoppers | Replacing rolling casters | Tool-free installation |
| Duoduo45 Bell Glides | Buyers comparing materials and capacity | Five-piece set; stated 120-pound rating per glide |
| RCHYFEED Bell Glides | Smooth floors and traction | Built-in felt or rubber pads |
uvce Store Low-Profile Bell Glides
These five replacement glides are designed to convert a rolling office chair or stool into a stationary seat. Their listed installed height is 37 mm (1.46 inches), making them a low-profile option compared with taller bell glides. Separate self-adhesive felt pads are included.
Best for: Buyers who want a lower chair base and do not need the seat to roll. The glides install by pressing them into the chair legs after removing the existing casters, with no tools required.
Check before buying: The listed stem size is 7/16 by 7/8 inch (11 by 22 mm). The listing says they do not fit IKEA chairs or 10 mm stem models. Confirm both stem dimensions and the effect of the shorter installed height on your chair.
AXL High-Profile Chair Glides
AXL’s five high bell glides have a listed overall installed height of 2.4 inches (61 mm). The taller profile is intended to match the height of many standard chair casters, which may help avoid a noticeable change in seat height when converting a chair to stationary use.
Best for: People who want a chair that stays put while keeping a caster-like base height. The product is described for office, gaming, and drafting chairs with a 7/16 by 7/8 inch (11 by 22 mm) stem.
Check before buying: The listing says these glides are not compatible with IKEA chairs. Compare the stated stem measurement and 61 mm height with your current setup; a similar profile does not guarantee a fit for every chair.
Five-Piece Caster Stoppers
This five-piece set is described as replacing swivel casters with fixed, non-rolling casters. The stated installation steps are to pull out the old caster and push the replacement into the chair leg. The listing says the units are intended for use on carpets and hard floors, including hardwood, tile, and laminate.
Best for: Buyers seeking a tool-free way to make a chair stationary without keeping its original rolling casters. The product description also emphasizes floor protection and weight distribution.
Check before buying: The provided details do not specify stem dimensions or installed height. Verify that the replacement mounting fits your chair before ordering, and note that the product name uses “stoppers” while the instructions describe caster replacement.
Duoduo45 Stainless-Steel Bell Glides
This set includes five glides made from stainless steel and plastic. Each is listed as measuring 5 by 5 by 3.8 cm, or about 1.96 by 1.96 by 1.49 inches. The listing gives a rated capacity of 120 pounds per glide and 600 pounds for a set of five.
Best for: Buyers who want the listed material and load information available when comparing replacement feet. The mounting rod is specified as 7/16 by 7/8 inch (11 by 22 mm), and the product is described as straightforward to install.
Check before buying: Confirm that the chair has the listed stem size. Treat the stated capacity as the manufacturer’s rating, and check that the chair’s intended use and setup align with the product instructions.
RCHYFEED Bell Glides With Floor Pads
RCHYFEED’s five replacement glides are designed to turn a swivel office chair into a stationary chair. The listing identifies an 11 mm stem and describes built-in felt or rubber pads for contact with smooth surfaces such as wood, ceramic tile, and laminate.
Best for: Buyers looking for stationary glides with stated traction and floor-pad features. The listing says the design converts the chair without losing chair height, but it does not provide a specific installed-height measurement.
Check before buying: The stated compatibility is for 11 mm stem chairs. Confirm the stem size and compare the glide shape with the chair legs; the product information does not give a precise height for checking seat-level changes.
Buying Guide: How to Choose Office Chair Glides
Will the stem fit your chair?
Check the caster stem before selecting replacement glides. Several products here specify 7/16 by 7/8 inch (11 by 22 mm), while the RCHYFEED listing specifies an 11 mm stem. Do not assume that all chair stems match. Check the product’s exclusions, especially if you have an IKEA chair or a 10 mm stem.
Do you want to preserve seat height?
Compare installed height with the current casters. The uvce Store set lists a 37 mm height, while AXL lists 61 mm. A lower replacement can change the chair’s overall height. Other products do not provide an exact installed-height figure, so consult their product details if maintaining seat height is important.
Do you need a stationary chair or a way to stop rolling?
Replacement glides remove the rolling function and create a stationary setup. The caster stopper listing also describes removing old casters and installing fixed replacements. Choose based on the installation method and measurements stated for the product; these listings do not establish that any option can switch between rolling and stationary use without changing parts.
What floor-contact features matter?
Look for details such as felt pads, rubber pads, or claims about use on particular floor types. The uvce Store set includes separate felt pads, and RCHYFEED describes built-in felt or rubber pads. Floor protection depends on the chair, floor, and how the chair is moved, so follow the product instructions and inspect contact surfaces regularly.
Frequently Asked Questions
Do office chair glides make a chair stationary?
Yes. These replacement glides are designed to replace rolling casters with fixed feet, so the chair no longer rolls like it did with wheels.
How do I measure an office chair caster stem?
Remove a caster and measure the stem’s diameter and length. Compare both measurements with the glide listing before ordering.
Will chair glides protect hardwood floors?
Some listed products include felt or rubber pads or describe floor-protection features. Check the specific product details and keep the contact surfaces clean to reduce the risk of marks.
Can I use these glides on an IKEA chair?
Do not assume compatibility. The uvce Store and AXL listings specifically exclude IKEA chairs; check the stem size and product guidance for any other set.
Will replacing casters change my chair height?
It can. Compare the replacement’s installed height with your current casters. The uvce Store and AXL listings provide specific heights; several other listings do not.